Menu
Edit Content
Warewashing
Company
Services
How to Buy
Resources
Information
Warewashing
Company
How to Buy
Resources
Services
Information
Edit Content
Commissioned as a glass or dishwasher on install. As a glasswasher the 500 x 500mm basket can hold 25 pint-sized glasses and wash up to 1,000 glasses per hour. As a dishwasher the basket can hold 18 dinner plates and wash up to 540 plates per hour.
The C500 comes complete with a drain pump, rinse booster pump and detergent and rinse aid pumps with a double skinned door and cabinet to reduce noise and limit heat loss.
Inside, the C500 has new click in, click out wash arms, a new double filtration system, and new moulded wash tank and basket rails, all enhancing wash results and making the machine simple to clean. Reduced rinse water consumption and detergent usage.
Dimensions
600 mm x 600 mm x 820 mm
Basket Size
500 x 500 mm
Standard Equipment
Detergent and rinse aid pumps
Programmes
Glass - 1.5 & 2 minute cycles | Dish - 2, 3 & 5minute cycles
Dimensions
600 mm x 600 mm x 820 mm
Racks / hours
Glass 40 | Dish 30
Power
30amp or 15amp single phase | 30 Amp 3 phase
Width: 600 mm
Height: 820 - 850 mm
Depth: 600 mm
Entry Height: 352 mm
Drain Size: 40 mm
Basket Size: 500 mm x 500 mm
Glasses per rack: 25
Plates per rack: 18
Wash Programmes - Glass: 1.5 & 2 min. cycles
Wash Programmes Dish: 2, 3 & 5 min. cycles
Theoretical max. Racks per hour - Glass: 40
Theoretical max. Racks per hour - Dish: 30
Wash Tank Capacity: 15 litres
Rinse Tank Capacity: 6.5 litres
Wash Temperature: 60 °C
Rinse Temperature - Glass 70 °C
Rinse Temperature - Dish: 82 °C
Water Consumption per Cycle: 2.75 litres
Hydraulic specifications
Water supply connection: G3/4” (3/4” BSP)
Required water pressure min/max: 1-10 bar
Incoming water temperature min/max: 4 °C / 55 °C
Drain size: 40mm diam.
Maximum drain height (from machine base): 600mm
Optional integrated water softener: Yes
Electrical specifications
15 Amp – 1 Phase
Amps Required: 15 A (1 Phase)
Standard operating voltage: 220 – 240V/ 1N ~ / 50Hz
Total connected load: 2.5 kW
30 Amp – 1 Phase
Amps Required: 30 A (1 Phase)
Standard operating voltage: 220 – 240V/ 1N ~ / 50Hz
Total connected load: 6.5 kW
15 Amp – 3 Phase
Amps Required: 15 A (3 Phase)
Standard operating voltage: 380 – 415V/ 3N ~ / 50Hz
Total connected load: 6.5 kW
Additional Info
Service: Installation
